Garmin Vector 2 Power Pedals 2016
Measure Where It Matters
Measures power output at the pedal, where force is applied
Left/right balance: average at various time intervals
Measures cadence, total power (watts), intensity factor
Install it yourself in minutes
Easily transferable between bikes
ANT+ wireless protocol
Garmin brings power to the people with Vector, an innovative pedal-based power meter. It not only changes how power is measured; it changes how cyclists get power - making it extremely easy to buy and install. Vector measures power at the pedal, where force is applied. It's a direct measurement power meter that delivers reliable, accurate data. Because the force sensors are housed in each pedal, Vector gives you the unique ability to see right and left leg power independently.
Easy to Buy, Install, Own
In the past, owning a power meter was a complicated process and often involved making mechanical tradeoffs for your bike. Vector changes all of that. Now you can walk into your local bike shop, walk out with a Vector power meter in hand, and then install it yourself in minutes. There's no need for a mechanic, no downtime while your bike is in the shop. Plus, there are no complex drivetrain or wheel tradeoffs to consider and no external sensors to install.
Another advantage of Vector is that you can use the same system on multiple bikes by simply swapping out pedals and moving the wireless head unit. And, you can take Vector with you when you're going out of town for a race or when you're traveling and might be renting or borrowing a bike. It's also easy to update Vector software as enhancements are made, thanks to its ANT+ wireless technology.
Wizardry Behind the Watts
Vector works by measuring the deflection in the pedal spindle as you pedal. By comparing that measured deflection to a factory-calibration, Vector can determine how much force you're applying to the pedal. Vector measures the force you apply a few hundred times every second. Built-in accelerometers also measure your pedaling cadence. The force sensor and related electronics are permanently and securely sealed within the pedal spindle.
Complete Cycling Suite
If you're already using a compatible Garmin head unit such as the Garmin Edge 500, 510, 800, 810 or Forerunner 910XT, adding a Vector power meter will take your training to the next level. Vector measures total power, left and right leg power and cadence and sends the data to compatible Edge cycling computers or other ANT+ enabled head units. Complete the suite with post-ride analysis, mapping, route planning and data sharing at Garmin Connect. Having all your cycling electronics and analysis from one brand means you can trust the equipment, the user experience and the support.
Now vector has a large pedal option so you can install Vector on thicker cranks, such as many Specialized models. Vector measures total power, cadence and left/right power balance, transmitting data to a compatible Edge, Forerunner or other ANT+ enabled head unit for easy viewing.
With additional crank arm clearance - in thickness and width - Vector fits almost any bike. The standard pedal pods fit crank arms 12-15 mm in thickness and 38 mm in width. The large pedal pods fit crank arms 15-18 mm in thickness and up to 44 mm in width.
LYGON CYCLES is a long established store that has been owned and operated in the same location by Paul McInerney since the store was opened back in 1991.
A GIANT Bicycle Authorised Dealer since 1991 along with KONA,LOOK and CASATI for many years, you can be sure of the support and expertise that you would expect when purchasing or repairing any Bicycle or accessory.